New RCNI Exam Book - Current RCNI Exam Content

Rated:

, 0 Comments

Total visits: 6

Posted on: 05/20/25

You will also face your doubts and apprehensions related to the RUCKUS RCNI exam. Our RUCKUS RCNI practice test software is the most distinguished source for the RUCKUS RCNI Exam all over the world because it facilitates your practice in the practical form of the RCNI certification exam.

RUCKUS RCNI Exam Syllabus Topics:

Topic	Details
Topic 1	RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.
Topic 2	ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2 3 protocols, and ICX services, IPv4 IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Topic 3	ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.
Topic 4	Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.

>> New RCNI Exam Book <<

Pass Your RUCKUS RCNI Exam with Perfect RUCKUS New RCNI Exam Book Easily

Individuals who pass the RUCKUS Certified Networking Implementer certification exam demonstrate to their employers and clients that they have the knowledge and skills necessary to succeed in the industry. ITPassLeader is aware that preparing with outdated RCNI Study Material results in a loss of time and money.

RUCKUS Certified Networking Implementer Sample Questions (Q30-Q35):

NEW QUESTION # 30
By default, how often are VRRP-E hello messages sent from the master?

A. every 1 second
B. every 5 seconds
C. every 3 seconds
D. every 60 seconds

Answer: A

Explanation:
In Virtual Router Redundancy Protocol Extended (VRRP-E) configurations on RUCKUS ICX switches, the master router sends hello messages at regular intervals to indicate its active status. By default, these hello messages are sent every 1 second.
Key Points:
* Hello Interval: The frequency at which the master router sends hello messages to backup routers.
* Default Value: 1 second.
* Purpose: To inform backup routers of the master's presence and operational status. If backup routers do not receive hello messages within a specified dead interval, they assume the master is down and initiate a failover.
Configuration:
* Viewing Current Settings:
* To display the current VRRP-E configuration, including hello intervals:
sql
Copy code
show vrrp
* Modifying the Hello Interval:
* To change the hello interval, enter VRRP-E configuration mode for the specific virtual router instance and use the following command:
php
Copy code
vrrp <vrid> advertisement-interval <seconds>
* <vrid>: Virtual Router ID.
* <seconds>: Desired interval in seconds.
Example:
To set the hello interval to 2 seconds for VRID 1:
bash
Copy code
enable
configure terminal
interface ethernet 1/1/1
vrrp 1
advertisement-interval 2
exit
write memory
Considerations:
* Network Stability: Setting the hello interval too low can lead to unnecessary failovers due to transient network issues. Conversely, setting it too high can delay failover detection.
* Consistency: Ensure that all routers in the VRRP-E group have consistent hello and dead interval settings to prevent configuration mismatches.
References:
* Ruckus FastIron Layer 3 Routing Configuration Guide, 08.0.91
* Ruckus FastIron Command Reference Guide, 08.0.70

NEW QUESTION # 31
Which device will become the root in the Spanning Tree election process?

A. the device with the highest bridge priority value
B. the device with the highest IP address
C. the device with root guard enabled
D. the device with the lowest bridge ID

Answer: D

Explanation:
In the Spanning Tree Protocol (STP), the root bridge is the central reference point for all spanning tree calculations. The election of the root bridge is determined by the bridge ID (BID), which comprises two components:
* Bridge Priority:
* A configurable value ranging from 0 to 65,535, in increments of 4,096. The default priority is typically 32,768.
* MAC Address:
* The unique hardware address of the switch.
Root Bridge Election Process:
* Lowest Bridge ID Selection:
* STP elects the switch with the lowest bridge ID as the root bridge. The bridge ID is determined by combining the bridge priority and the MAC address.
* Priority Comparison:
* Switches first compare the bridge priority values. The switch with the lowest priority value is favored.
* MAC Address Comparison:
* If multiple switches share the same priority value, the switch with the lowest MAC address becomes the root bridge.
Example:
* Switch A:
* Priority: 32,768
* MAC Address: 00:1A:2B:3C:4D:5E
* Switch B:
* Priority: 32,768
* MAC Address: 00:1A:2B:3C:4D:5F
In this scenario, both switches have the same priority. Therefore, STP compares the MAC addresses, and Switch A, with the lower MAC address, is elected as the root bridge.
Key Points:
* Enabling root guard on a device does not influence its election as the root bridge; instead, it prevents designated ports from becoming root ports.
* The device with the lowest bridge ID (combination of priority and MAC address) is elected as the root bridge.
* A lower bridge priority value increases the likelihood of a switch becoming the root bridge.
References:
* Root Bridge Election in Spanning Tree Protocol
* Spanning Tree Protocol - Part 3: Bridge ID, Priority, System ID
Sources

NEW QUESTION # 32
In a core/edge network topology, which ports should have Root Guard enabled?

A. management ports at the core
B. edge ports facing the core
C. core ports facing the edge
D. route-only ports facing the WAN

Answer: C

Explanation:
In a core/edge network topology, Root Guard is a Spanning Tree Protocol (STP) feature that prevents designated ports from becoming root ports. This ensures that the core switch remains the root bridge, maintaining a stable and predictable network topology.
Configuration Steps:
* Identify Core Ports Facing the Edge:
* Determine which ports on the core switch connect to edge switches.
* Enable Root Guard on These Ports:
* Access the core switch's configuration mode.
* For each identified port, apply the Root Guard configuration:
interface ethernet 1/1/1
spanning-tree root-guard
* Replace 1/1/1 with the actual port identifier.
Example Configuration:
arduinoICX(config)# interface ethernet 1/1/1
ICX(config-if-e1000-1/1/1)# spanning-tree root-guard
This configuration ensures that port 1/1/1 on the core switch will not accept superior BPDUs, preventing edge switches from becoming the root bridge.

NEW QUESTION # 33
When using zero-touch stacking, which two prerequisites must be in place to ensure all devices join the stack? (Choose two.)

A. ensure units have clean configurations
B. issue stack disable on intended member devices
C. configure each unit's management IP, VLANs, and tagging
D. enable stacking on all devices
E. enable stacking on the active controller

Answer: A,E

NEW QUESTION # 34
Which method is required to install a feature license on an ICX running FastIron 08.0.95?

A. USB
B. FTP
C. CLI
D. TFTP

Answer: C

Explanation:
To install a feature license on a RUCKUS ICX switch running FastIron 08.0.95, follow these steps using the Command Line Interface (CLI):
* Obtain the License Key:
* Purchase the desired feature license from RUCKUS.
* Receive the license key, typically provided as a string of characters.
* Access the Switch CLI:
* Connect to the switch via console, SSH, or Telnet.
* Enter privileged EXEC mode:
enable
* Enter Global Configuration Mode:
* Access global configuration mode:
configure terminal
* Install the License Key:
* Enter the license key using the following command:

NEW QUESTION # 35
......

Under the tremendous stress of fast pace in modern life, this version of our RCNI test prep suits office workers perfectly. It can match your office software and as well as help you spare time practicing the RCNI exam. As for its shining points, the PDF version can be readily downloaded and printed out so as to be read by you. It’s really a convenient way for those who are fond of paper learning. With this kind of version, you can flip through the pages at liberty and quickly finish the check-up RCNI Test Prep. What’s more, a sticky note can be used on your paper materials, which help your further understanding the knowledge and review what you have grasped from the notes.

Current RCNI Exam Content: https://www.itpassleader.com/RUCKUS/RCNI-dumps-pass-exam.html

Tags: New RCNI Exam Book, Current RCNI Exam Content, Mock RCNI Exams, RCNI New APP Simulations, RCNI Useful Dumps

Comments

There are still no comments posted ...

Rate and post your comment

Username:
Password:
Forgotten password?

Most Popular

New RCNI Exam Book - Current RCNI Exam Content

RUCKUS RCNI Exam Syllabus Topics:

Pass Your RUCKUS RCNI Exam with Perfect RUCKUS New RCNI Exam Book Easily

RUCKUS Certified Networking Implementer Sample Questions (Q30-Q35):

Login